가스장비사업
원격검침용 스마트
계량기 사업
MAP 포장사업
LAB Gas System
Gas Safety System
압력제어
(Pressure Control)
유량제어
(Flow Control)
가스혼합
(Gas Mixing)
가스분석
(Gas Analysis)
가스안전
(Gas Safety)
특수사양 레귤레이터
(Special Spec Regulators)
가스발생
(Gas Generator)
원격검침
(Advanced Metering Infrastructure)
가스치환포장(MAP)
MAP 시스템 개요
가스혼합기
(Gas Mixer)
가스분석기
(Gas Analyser)
누설검지기
(Leak Detector)
적용분야
Q&A
자료실
실험실 가스공급
(Gas Supply)
실험실 가스분석
(Gas Analysis)
실험실 가스유량제어
(Gas Flow Control)
실험실 가스혼합
(Gas Mixing)
실험실 가스안전
(Gas Safety)
견적문의 전화상담요청 A/S 문의 기술자료 Case Study 자주묻는질문(FAQ) Trouble shooting
회사개요 인사말 회사연혁 조직도 최근소식/업데이트 품질/환경 경영방침 지적재산권/인증서 주요고객사 채용정보 연구개발 찾아오시는 길
대구경 화염방지기 (FLAME ARRESTOR)제품 선정 및 사양 확인
모델, 재질, 사용 가스 등 상세 사양에 따라 차이가 있으니 확인 바랍니다.
1. 관련 인증
국내 : KFI (한국소방산업기술원) 성능 검사
국제 : ATEX 2014/34/EU 방폭 인증,
EN ISO 16852 국제 규격 (Flame arrester:Performance requirements, test methods and limits for use)
2. 사용 가스(Gas, Explosion group)
예시 : 수소 Hydrogen (H2, IIC), 메탄 Methane (CH4. IIA), 유증기 Oil vapor (IIA) 등
3. 사용 압력(Working pressure) : 1.1 bar 이하
4. 사용 온도(Working temperature) : 60’C 이하
5. 재질 :
스틸 (아연 크롬 도금 / 카본 스틸 에폭시 코팅)
알루미늄(A2CB-F)
스테인레스스틸 (304 / 316 / 316L / 316Ti )
6. 설치 위치, 방향, 폭연/폭굉 [링크를 클릭하시면 홈페이지로이동합니다.]
설치 위치 |
역화 종류 |
설치 방향 |
폭연 (Deflagration, 관경*50배 이내, 아음속) |
수직 (상향) |
|
수직 (상향), 수평 (가로) |
폭연, 폭굉설치위치및화염속도차이영상: https://youtu.be/LxsTaGw2qdg
7. 연결규격, 크기
플랜지 Flange : R.F (RaisedFace)타입, ANSI 150 pound 또는 JIS10kgf/cm2
나사 Thread : NPT (2인치이하, 제작 가능 여부 사전 확인)
25A |
32A |
40A |
50A |
65A |
80A |
100A |
150A |
200A |
250A |
300A |
350A |
400A |
450A |
DN 25 |
DN 32 |
DN 40 |
DN 50 |
DN 65 |
DN 80 |
DN 100 |
DN 150 |
DN 200 |
DN 250 |
DN 300 |
DN 350 |
DN 400 |
DN 450 |
1" |
1 1/4" |
1 1/2" |
2" |
2 1/2" |
3" |
4" |
6" |
8" |
10" |
12" |
14" |
16" |
18" |
8. 수량, 납기 (발주서 기준 6~8주 내외, 상세납기 재확인)
|
END OF LINE (배관 끝단) |
INLINE (배관 중간)
|
종류 |
DEFLAGRATION(폭연) |
DEFLAGRATION (폭연)또는 DETONATION(폭굉) |
특징 |
l 배관 끝단 설치, “한쪽”배관 연결 l 이물질 유입 방지갓, 수직 상향 설치 l 제품 링크 https://bit.ly/2DbY4ij |
l 배관 중간 설치, “양쪽” 배관 연결 l 설치 방향 제약 없음, 수직또는 수평 l 제품 링크 https://bit.ly/2D8tbLK |
|
인라인 폭연DEFLAGRATION |
인라인 폭굉DETONATION |
링크 |
||
역화 |
아음속 |
초음속 |
설치 |
배관 끝에서부터 관경*50배 거리 이내 |
배관 끝에서부터 관경*50배 거리 밖 |
|
|
인라인 화염방지기 폭연, 폭굉비교 영상 https://youtu.be/LxsTaGw2qdg
FLAMMER 기업 인증 및 국제 규격
l ISO 9001(품질경영시스템)
l CE 0045 ATEX directive 2014/34/EU
l 독일연방물리기술청(PTB) Notification of conformity
: Quality Assurance of the production process
: Flame Arrester, fittings and components
FLAMMER 제품 인증 및 국제 규격
l Verification Certificate EN 10204 (유료 발급)
l ATEX 방폭 인증 [인라인, 엔드라인 개별 제품 인증]
l EN ISO 16852 (Flame arresters Performancerequirements, test methods and limit for use)
: MESG (MaximumExperimental Safe Gap), Classification of Detonation and Deflagration
l Declaration of Conformity
: ATEX Directive2014/34/EU
: DIN EN 1127-1Explosive atmospheres - Explosion prevention and protection
EN ISO 16852 : MESG: Max. Experimental Safety Gap of gasmixture (mm)
IEC GAS GROUP |
Max. Experimental Safety Gap of gas mixture(MESG, mm) |
National Electrical Code (NEC) |
Reference substance for testing flame arrestor |
Gas purity by volume (%) |
Gas in Air by volume (%) |
Safe gap of gas-air mixture (mm) |
IIA1 |
≥1.14 |
Methane |
≥98 |
8.4 ±0.2 |
1.16 ±0.02 |
|
IIA (b) |
≥0.90 |
D |
Propane |
≥95 |
4.2 ±0.2 |
0.94 ±0.02 |
IIB1 (b) |
≥ 0.85 |
C |
Ethane(Ethylene) |
≥98 |
5.2 ±0.2 |
0.83 ±0.02 |
IIB2 (b) |
≥0.75 |
C |
Ethane (Ethylene) |
≥98 |
5.7 ±0.2 |
0.73 ±0.02 |
IIB3 (b) |
≥0.65 |
C |
Ethane(Ethylene) |
≥98 |
6.6 ±0.3 |
0.67 ±0.02 |
IIB (b) |
≥0.5 |
B |
Hydrogen, Acetylene |
≥99 |
45.5 ±0.5 |
0.48 ±0.02 |
IIC |
≥0.5 |
B |
Hydrogen,Acetylene |
≥99 |
28.5 ±2.0 |
0.31 ±0.02 |
NOTE) The ranking in columns 1 and 2 is notcompared with the ranking in IEC 60079-1-1.
(a) When the test gas mixture is measuredby the safe gap of the gas-airmixture, the mixture shall be in the lower half of the specifiedgap range. If the test gas mixture is measured by the percentage of gas in airby volume, then for IIA1,IIA, IIB3 and IIC, the mixture shall be within the specifiedpercentage volume range. For IIB1 and IIB2, the mixture shall be in the upper halfside of the specified percentage volume range. For IIB, the mixture shall be on the lowerhalf side of the specified percentage volume range. All the stated fullrange tolerances relate to the uncertainty of the measuring equipment.
(b) With small diameters, it may bedifficult to generate stable detonations. Tests may be carried out using agas-air mixture of a lower safe gap.
EN ISO 16852 :Classification of Detonation and Deflagration폭연, 폭굉 차이
The nominal pipe diameter D shall have the same sizeas the flame arrester connection. The pipe length Li shall be not less than 10 x D and not greater than 50 x Dfor hydrocarbon-air mixtures (IIA, IIB1, IIB2, IIB3) and not greater than 30 x D for hydrogen-air mixtures (IIBand IIC). The pipe length Lni shall be 50 x D for hydrocarbon-air mixtures (IIA, IIB1, IIB2, IIB3) and 30 x D forhydrogen-air mixtures (IIB and IIC). |
폭연과 폭굉의 구분은 화염의 속도이며, 이를구분하는 기준이 배관 끝단으로부터의 거리입니다.
배관 끝단 – 화염방지기 까지 거리가 길수록 화염이 가속할 수 있는 거리 역시 증가하므로
실제 화염 발생시 속도 측정값이 아닌 ‘설치 위치’를 기준으로 폭연 / 폭굉을 구분합니다.
폭연 Deflagration = Subsonic (아음속화염) = L < 50 * D
폭굉 Detonation = Supersonic (초음속화염) = L > 50 * D